Снапиши на гды ты в последний раз пеутшествовал с кем и что больше понравилось

1) in static, steady or dead loads are forces that are applied slowly and remain nearly constant after being applied to the body such as the loads on most buildings or the load applied to a bar in the usual type of testing machine. - герундий

2) repeated (причастие)  loads are forces that are applied a very large number of times causing(причастие) a stress in the material that is continually changing, usually through some definite range.

3) such are the loads applied to the connecting(прчиастие) rod of an engine is running, the wheel loads on a railroad rail as a train passes over the rail and similar ones.

4) an impact load, in general, is applied by a moving (причастие) body when it comes in contact with the resisting (причастие)  body.

5) the force exerted(причастие) by the moving (причастие) body and the period during which it acts in general cannot be determined.

6) for this reason in some problems it is more satisfactory to calculate the stress and strain produced by an impact load from the energy delivered to the resisting (причастие) body by the moving (причастие) body.

7) other classifications of loads.-loads may be classified as distributed loads and concentrated (причастие)  loads.

8) a distributed (причастие) load may be uniformly distributed or non-uniformly distributed.

9) a concentrated load is one whose area of contact with the resisting (причастие) body is negligible in comparison with the area of the resisting (причастие) body.